+ Connector Complement: 2 Custom-designed loudspeaker binding posts 1 balanced input connector (female XLR) 1 unbalanced input connector (RCA) 2 1/8" (3.5mm) mini-jacks for trigger control 1 RS-232 port (RJ-11) 2 Mark Levinson Link communication ports (RJ-45) 1 IEC-standard AC mains receptacle
Connector Complement:
2 Custom-designed loudspeaker binding posts 1 balanced input connector (female XLR) 1 unbalanced input connector (RCA) 2 1/8" (3.5mm) mini-jacks for trigger control 1 RS-232 port (RJ-11) 2 Mark Levinson Link communication ports (RJ-45) 1 IEC-standard AC mains receptacle
Frequency Response:
20Hz - 20kHz (±0.3dB)
Input Impedence:
100kohms (balanced), 50kohms (unbalanced)
Input Sensitivity:
2.83V output: 130mV, full output 2.419V
Mains Voltage:
Preset (determined by the needs of country for which the unit was manufactured)
Output Impedence:
Less than 0.05ohms from 20Hz - 20kHz
Power Consumption:
525W (±5%) on, 100W (±5%) standby
Power Output:
350 w/ch rms power at 8ohms 700 w/ch rms power at 4ohms All power ratings from 20Hz - 20kHz at less than 0.5% THD (assuming that the AC mains can deliver adequate current without its own voltage sagging)
Signal-to-Noise Ratio:
Better than -80dB (ref. 2.83V)
Dimensions (W x H x D):
450 x 194 x 513 mm
Weight:
Net: 38.6 kg
Sản phẩm liên quan
Balanced Audio Technology Power Amplifier VK-600M SE
Bảo hành 12 tháng - Giá: 15.600 USD
Khuyến mãi: Giảm giá đặc biệt 40%
Tình trạng: Còn hàng
Tính năng cơ bản: Output Power: 300W / 600W into 8 Ω / 4 Ω (Both at less than 0.2% THD)